A&D AD-4212B-23 Manuale delle Istruzioni Scaricare il pdf (Pagina 24)

How to use the sheath holder

Use the sheath holder to protect the sheath when you carry the thermometer.

Be sure the sheath holder is removed from the sheath when performing measurements.

To prevent the sheath holder from deformation or damage, before using the sheath holder, allow the

sheath to return to room temperature after high or low temperature measurements.

Daily care

Accurate measurements cannot be made if the temperature detection part is dirty. It should be kept

clean when performing measurements.

Do not rub the main body to clean. Rinse the dirt off using water.

When the dirt is hard to remove, wipe it off gently using a kitchen sponge, etc., dampened with a

neutral detergent.

Do not use abrasives or volatile solvents such as thinner or benzine.

Specifications

Sensor : Thermistor

Temperature measurement range : -40.0°C to +260.0°C

Display resolution : 0.1°C

Measurement accuracy : ±1.0°C (-9.9 to 59.9°C)

±2.0°C (-19.9 to -10.0°C, 60.0 to 99.9°C)

±3.0°C (-29.9 to -20.0°C, 100.0 to 199.9°C)

±4.0°C (-40.0 to -30.0°C, 200.0 to 260.0°C)

Display refresh rate : Every second

Waterproof level : JIS IPX7 (Waterproof for 30 minutes at a water depth of 1 meter, still

water at room temperature)

Power supply : CR2032 x 1 pc

Battery life : Approx.1 year (When used for one hour per day)

Operating temperature and humidity : 0 to 40°C, 75%RH or less, No condensation (Excluding the sheath)

Storage temperature and humidity : 0 to 50°C, 75%RH or less, No condensation

External dimensions of the sheath : 2.8 mm (Tip: 2.2 mm, length 20 mm)

Approx. 120 mm long

External dimensions : 40(W) x 187(H) x 17(D) mm (Excluding the protrusion)

Weight : Approx. 27 g (Including the battery and sheath holder)

Standard accessories : Instruction manual, sheath holder, battery (For monitoring purposes)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Nessun commento

A&D AD-4212B-23 Manuale delle Istruzioni Pagina 24